| | Sector | abcRailways Transport Services | Tender Value | N.A. | | Location | Karnataka - India | Ref.No | 85205637 | | Closing Date | 22 - Jul - 2025 | | | Manufacture, supply and installation of Cross beam girder. .
* Manufacture, supply and installation of Cross beam girder (Size of beam 11 meter long, Cross
section 500 mm Height & 180 mm width approx.) of 3ton EOT crane along with suitable Long transverse Ge
ared motors 2nos as per RWF Drawing no. 703402210640. Note 1. Only crane manufacturers or their auth
orized representatives with relevant expertise shall be eligible to participate in the tender. 2. The drawing
attached is only for the general guidance. The supplier shall visit the RWF and take necessary data before c
ommencing the work. 3. All raw materials necessary for the fabrication, including channels, plates, and stru
ctural steel, shall be supplied by the Supplier. 4. The Supplier shall also be responsible for the transportatio
n of all components such as the fabricated cross beam, hoist, channels, plates, etc., to the Rail Wheel Facto
ry (RWF), including both to and fro movements, and shall bear all associated transportation charges. 5. The
Supplier shall dismantling the existing electrical connections and the removal of the hoist assembly. Proper
support beams must be provided between the end carriages, and the cross beam (girder) must be carefully
supported before the removal of mounting bolts. The cross beam should then be lowered cautiously to prev
ent damage to surrounding equipment and shifted to the designated location. The temporary support beam
for the end carriages shall be removed thereafter. 6. The Supplier shall remove the existing long travel gea
rbox along with its motor, and install a new gearbox and motor fitted with suitable gears and couplings. Th
e hoist is to be reinstalled in its original position, and all electrical connections must be restored accordingl
y. Once the mechanical and electrical installations are complete, the cross beam and associated structures
shall be painted in yellow and black colors, adhering to standard safety norms for cranes. 7. RWF will provi
de to the Supplier with air, electricity, water, and welding/oxy-cutting consumables free of cost. However, t
he Supplier is required to supply all raw materials for fabrication and arrange all necessary tools, lifting tac
kles, and handling equipment for the execution of the work. The Supplier is also obligated to provide appro
priate personal protective equipment (PPE) such as helmets, gloves, safety harnesses, and other safety gea
r to all personnel working at the site. 8. After completion of all work, the Supplier must conduct a load test
of the crane and submit a valid load test certificate. Throughout the execution, the Supplier will be solely re
sponsible for the safety of all workers engaged in the activity, and the entire work shall be carried out in co
mpliance with applicable safety standards and RWFs guidelines. 9. The motor with gearbox for the LT mov
ement shall have a minimum power of 1 HP, and its output speed shall be suitable to achieve an LT movem
ent speed of at least 20 meters per minute. [ Warranty Period 18 Months after the date of delivery ] ] |
|
|
If you are a new user, then please
register, it's Free and then fill the form below.
If you are registered with us, just fill the form below, we will get back to you
shortly.
|
All fileds marked with '*' are compulsary.
|
|
|
|